BLOCK FIXING ADHESIVE

---

Ready to use grey cement based non-shrink, self- cur-ing mortar for fixing AAC blocks, Concrete blocks, flyash bricks etc.

USES
Fixing and Jointing masonry units like AAC blocks,
Concrete blocks, fly ash bricks etc.

Advantages

• Ready to use, only water to be added.
• Thinner jointing material with very high tensile adhesion strength improving the overall masonry strength.
• Better bond than conventional cement based mortar
• Faster to apply due to good spreadable properties.
• Excellent high strength & water retention properties
• Economical as quantity of mortar is less than conventional mortar
• Self-curing.

Precaution and Instruction

• Ensure block work to be dry and surface be cleaned properly.
• Place the mortar on the blocks in thin layers using trowel.
• Always add powder to water & not vice-versa.
• No pre-wetting of block required
• Use proper tool and tackles during application ie thin 3mm metal notch trowel, mechanical mixer and rubber hammer etc.
• Clean all tool and equipment with water immediately after use.

If you need technical data that is not included here, please contact our technical team.

Appearance	Grey
Pot Life	1-2 Hrs
Open Time	15-20 Min
Hard Dry	24 Hrs
Required Water Ratio	Approx 25%
Coverage 3mm Thickness	3kg/m2 Using a 6x6mm Sq. Notch Trowel

Technical Information As per ASTM C1660-09

Testing Properties	Requirement	Test Result
Comprehensive Strength (28 Days)	≥6.0N/mm	7.651 N/mm2
Pull off test (28 Days)	–	0.620 N/mm2
Split Tensile Strength	≥0.49 N/mm2	0.601 N/mm2
Flexural Strength	–	3.943 N/mm2

MULTIUSE TILE ADHESIVE

Suitable for Wall Application, Tile on Tile & Floor.

Features & Advantages:-
· Enhanced Polymers
· High Bond Strength
· Zero Wastage
· No Shrinkage
· Contains special chemicals to obtained non-shrink
and excellent adhesion properties
· Better bond than conventional cement based mortar
· Normal setting and quick strength development
· Self curing
· Good mechanical strength
· Can also be used for tile on tile Application

Precaution and Instruction

• Always add Powder to Water
• Wall Application, tile on tile & floor
• Do not apply on damp surfaces.
• Grouting should not be done 24hrs.
• Use proper tool and tackles during application ie thin 3mm metal notch trowel, mechanical mixer and rubber hammer etc.
• Clean all tool and equipment with water immediately after use.

Appearance	Grey
Pot Life	140 Min
Open Time	35 Min (Approx)
Adjustment Time	25 Min (Approx)
Required Water Ratio	Approx 20%
Coverage 3mm Thickness	3kg/m2 Using a 6x6mm Sq. Notch Trowel

Technical Information As per ISO & EN Data (C1T)

Testing Properties	Requirement	Test Result
Comprehensive Strength (28 Days)	–	6.834 N/mm2
Pull off test (28 Days)	–	0.78 N/mm2
Tensile Adhesion at Dry Condition (28 Days)	≥0.5 N/mm2	0.596 N/mm2
Tensile Adhesion at Wet Condition (28 Days)	≥0.5 N/mm2	0.7 N/mm2
Shear Adhesion (Dry Condition)(28 Days)	≥0.1 N/mm2	1.031 N/mm2
Shear Adhesion (Wet Condition)(28 Days)	≥0.1 N/mm2	1.254 N/mm2
Shear Adhesion (Heat Ageing Condition)(28 Days)	≥0.1 N/mm2	1.864 N/mm2

If you need technical data that is not included here, please contact our technical team.

HEAVY DUTY TILE ADHESIVE

Suitable for Large Format Tiles, Marble, Granite, Stones, Glass Mosaic,Laminated Stoneware

Features & Advantages:-

• High Bond Strength
• Polymer Modified
• Extended Open Time
• Sag Resistant Formula
• Weather proof
• No Shrinkage
• Easy to Use

Technical Information As per IS 15477:2019

• Always add Powder to Water
• For all type of marble, tiles & stones
• Do not apply on damp surfaces.
• Grouting should not be done 24hrs.
• Use proper tool and tackles during application ie thin 3mm metal notch trowel, mechanical mixer and rubber hammer etc.
• Clean all tool and equipment with water immediately after use.

Appearance	Grey/White
Pot Life	180 Min
Type	II
Open Time	40 Min (Approx)
Adjustment Time	40 Min (Approx)
Required Water Ratio	Approx 20%
Coverage 3mm Thickness	3kg/m2 Using a 6x6mm Sq. Notch Trowel

Testing Properties	Requirement	Test Result
Comprehensive Strength (28 Days)	–	8.760 N/mm2
Pull off test (28 Days)	–	1.816 N/mm2
Tensile Adhesion at Dry Condition (28 Days)	≥1.5 N/mm2	1.902 N/mm2
Tensile Adhesion at Wet Condition (28 Days)	≥1.0 N/mm2	1.414 N/mm2
Shear Adhesion (Dry Condition)(28 Days)	≥1.5 N/mm2	5.0 N/mm2
Shear Adhesion (Wet Condition)(28 Days)	≥1.0 N/mm2	1.084 N/mm2
Shear Adhesion (Heat Ageing Condition)(28 Days)	≥1.0 N/mm2	3.860 N/mm2

If you need technical data that is not included here, please contact our technical team.

READY MIX PLASTER

Suitable for Large Format Tiles, Marble, Granite, Stones, Glass Mosaic,Laminated Stoneware

Features & Advantages:-

• High Bond Strength
• Pre-mixed
• Easy to use
• Economical
• Crack free wall
• Excellent coverage
• Faster Application
• Easy to Use

• 6 Months Shelf Life
• Store in dry and packed condition
• Grayish granular powder
• Prepare plaster by adding Ready mix Plaster to 18-20% of water
• A coverage of 17-20 Sq. Ft. per bag of 40 Kg is received when applied with a thickness of 10-12 mm
• Ready mix plaster requires 15 – 18 % of water by weight of material Mix using mechanical stirrer for 5 minutes to ensure consistency free of lumps
• Use proper tool and tackles during application ie thin 3mm metal notch trowel, mechanical mixer and rubber hammer etc.
• Clean all tool and equipment with water immediately after use.

Appearance	Grey/White
Pot Life	1-1.5 Hrs
Initial Setting Time	30-60 Min
Final Setting Time	600- 700 Min
Water Retentivity	Min 95%
Dry density	1770 kg/m3
Coverage 3mm Thickness	3kg/m2 Using a 6x6mm Sq. Notch Trowel

Testing Properties	Requirement	Test Result
Comprehensive Strength (28 Days)	–	> 10.0 MPa
Pull off Adhesion Strength	–	> 1.5 MPa

If you need technical data that is not included here, please contact our technical team.