BLOCK FIXING ADHESIVE
Ready to use grey cement based non-shrink, self- cur-ing mortar for fixing AAC blocks, Concrete blocks, flyash bricks etc.
USES
Fixing and Jointing masonry units like AAC blocks,
Concrete blocks, fly ash bricks etc.
Advantages
- Ready to use, only water to be added.
- Thinner jointing material with very high tensile adhesion strength improving the overall masonry strength.
- Better bond than conventional cement based mortar
- Faster to apply due to good spreadable properties.
- Excellent high strength & water retention properties
- Economical as quantity of mortar is less than conventional mortar
- Self-curing.
Precaution and Instruction
- Ensure block work to be dry and surface be cleaned properly.
- Place the mortar on the blocks in thin layers using trowel.
- Always add powder to water & not vice-versa.
- No pre-wetting of block required
- Use proper tool and tackles during application ie thin 3mm metal notch trowel, mechanical mixer and rubber hammer etc.
- Clean all tool and equipment with water immediately after use.
If you need technical data that is not included here, please contact our technical team.
| Appearance | Grey |
| Pot Life | 1-2 Hrs |
| Open Time | 15-20 Min |
| Hard Dry | 24 Hrs |
| Required Water Ratio | Approx 25% |
| Coverage 3mm Thickness | 3kg/m2 Using a 6x6mm Sq. Notch Trowel |
Technical Information As per ASTM C1660-09
| Testing Properties | Requirement | Test Result |
|---|---|---|
| Comprehensive Strength (28 Days) | ≥6.0N/mm | 7.651 N/mm2 |
| Pull off test (28 Days) | – | 0.620 N/mm2 |
| Split Tensile Strength | ≥0.49 N/mm2 | 0.601 N/mm2 |
| Flexural Strength | – | 3.943 N/mm2 |
MULTIUSE TILE ADHESIVE
Suitable for Wall Application, Tile on Tile & Floor.
Features & Advantages:-
· Enhanced Polymers
· High Bond Strength
· Zero Wastage
· No Shrinkage
· Contains special chemicals to obtained non-shrink
and excellent adhesion properties
· Better bond than conventional cement based mortar
· Normal setting and quick strength development
· Self curing
· Good mechanical strength
· Can also be used for tile on tile Application
Precaution and Instruction
- Always add Powder to Water
- Wall Application, tile on tile & floor
- Do not apply on damp surfaces.
- Grouting should not be done 24hrs.
- Use proper tool and tackles during application ie thin 3mm metal notch trowel, mechanical mixer and rubber hammer etc.
- Clean all tool and equipment with water immediately after use.
| Appearance | Grey |
| Pot Life | 140 Min |
| Open Time | 35 Min (Approx) |
| Adjustment Time | 25 Min (Approx) |
| Required Water Ratio | Approx 20% |
| Coverage 3mm Thickness | 3kg/m2 Using a 6x6mm Sq. Notch Trowel |
Technical Information As per ISO & EN Data (C1T)
| Testing Properties | Requirement | Test Result |
|---|---|---|
| Comprehensive Strength (28 Days) | – | 6.834 N/mm2 |
| Pull off test (28 Days) | – | 0.78 N/mm2 |
| Tensile Adhesion at Dry Condition (28 Days) | ≥0.5 N/mm2 | 0.596 N/mm2 |
| Tensile Adhesion at Wet Condition (28 Days) | ≥0.5 N/mm2 | 0.7 N/mm2 |
| Shear Adhesion (Dry Condition)(28 Days) | ≥0.1 N/mm2 | 1.031 N/mm2 |
| Shear Adhesion (Wet Condition)(28 Days) | ≥0.1 N/mm2 | 1.254 N/mm2 |
| Shear Adhesion (Heat Ageing Condition)(28 Days) | ≥0.1 N/mm2 | 1.864 N/mm2 |
If you need technical data that is not included here, please contact our technical team.
TILE ADHESIVE
READY TO USE TILE ADHESIVE FOR FIXING FLOOR TILES
Features & Advantages:-
Ready to use, only water to be added.·
· Contains special chemicals to obtained non-shrink
and excellent adhesion properties
· Better bond than conventional cement based mortar
· Normal setting and quick strength development
· Self curing
· Good mechanical strength
· Suitable for Ceramic & Vitrified floor Tiles Only
· Suitable for New construction
· Can also be used for tile on tile Application
Precaution and Instruction
- Always add Powder to Water
- For all ceramic and vitrified tiles
- Do not apply on damp surfaces.
- Grouting should not be done 24hrs.
- Use proper tool and tackles during application ie thin 3mm metal notch trowel, mechanical mixer and rubber hammer etc.
- Clean all tool and equipment with water immediately after use.
| Appearance | Grey |
| Pot Life | 90 Min |
| Type | I |
| Open Time | 30 Min (Approx) |
| Adjustment Time | 20 Min (Approx) |
| Required Water Ratio | Approx 20% |
| Coverage 3mm Thickness | 3kg/m2 Using a 6x6mm Sq. Notch Trowel |
Technical Information As per IS 15477:2019
| Testing Properties | Requirement | Test Result |
|---|---|---|
| Comprehensive Strength (28 Days) | – | 9.407 N/mm2 |
| Pull off test (28 Days) | – | 0.810 N/mm2 |
| Tensile Adhesion at Dry Condition (28 Days) | ≥0.5 N/mm2 | 0.51 N/mm2 |
| Shear Adhesion (Dry Condition)(28 Days) | ≥0.5 N/mm2 | 1.986 N/mm2 |
If you need technical data that is not included here, please contact our technical team.
HEAVY DUTY TILE ADHESIVE
Suitable for Large Format Tiles, Marble, Granite, Stones, Glass Mosaic,Laminated Stoneware
Features & Advantages:-
- High Bond Strength
- Polymer Modified
- Extended Open Time
- Sag Resistant Formula
- Weather proof
- No Shrinkage
- Easy to Use
Technical Information As per IS 15477:2019
- Always add Powder to Water
- For all type of marble, tiles & stones
- Do not apply on damp surfaces.
- Grouting should not be done 24hrs.
- Use proper tool and tackles during application ie thin 3mm metal notch trowel, mechanical mixer and rubber hammer etc.
- Clean all tool and equipment with water immediately after use.
| Appearance | Grey/White |
| Pot Life | 180 Min |
| Type | II |
| Open Time | 40 Min (Approx) |
| Adjustment Time | 40 Min (Approx) |
| Required Water Ratio | Approx 20% |
| Coverage 3mm Thickness | 3kg/m2 Using a 6x6mm Sq. Notch Trowel |
| Testing Properties | Requirement | Test Result |
|---|---|---|
| Comprehensive Strength (28 Days) | – | 8.760 N/mm2 |
| Pull off test (28 Days) | – | 1.816 N/mm2 |
| Tensile Adhesion at Dry Condition (28 Days) | ≥1.5 N/mm2 | 1.902 N/mm2 |
| Tensile Adhesion at Wet Condition (28 Days) | ≥1.0 N/mm2 | 1.414 N/mm2 |
| Shear Adhesion (Dry Condition)(28 Days) | ≥1.5 N/mm2 | 5.0 N/mm2 |
| Shear Adhesion (Wet Condition)(28 Days) | ≥1.0 N/mm2 | 1.084 N/mm2 |
| Shear Adhesion (Heat Ageing Condition)(28 Days) | ≥1.0 N/mm2 | 3.860 N/mm2 |
If you need technical data that is not included here, please contact our technical team.
READY MIX PLASTER
Suitable for Large Format Tiles, Marble, Granite, Stones, Glass Mosaic,Laminated Stoneware
Features & Advantages:-
- High Bond Strength
- Pre-mixed
- Easy to use
- Economical
- Crack free wall
- Excellent coverage
- Faster Application
- Easy to Use
- 6 Months Shelf Life
- Store in dry and packed condition
- Grayish granular powder
- Prepare plaster by adding Ready mix Plaster to 18-20% of water
- A coverage of 17-20 Sq. Ft. per bag of 40 Kg is received when applied with a thickness of 10-12 mm
- Ready mix plaster requires 15 – 18 % of water by weight of material Mix using mechanical stirrer for 5 minutes to ensure consistency free of lumps
- Use proper tool and tackles during application ie thin 3mm metal notch trowel, mechanical mixer and rubber hammer etc.
- Clean all tool and equipment with water immediately after use.
| Appearance | Grey/White |
| Pot Life | 1-1.5 Hrs |
| Initial Setting Time | 30-60 Min |
| Final Setting Time | 600- 700 Min |
| Water Retentivity | Min 95% |
| Dry density | 1770 kg/m3 |
| Coverage 3mm Thickness | 3kg/m2 Using a 6x6mm Sq. Notch Trowel |
| Testing Properties | Requirement | Test Result |
|---|---|---|
| Comprehensive Strength (28 Days) | – | > 10.0 MPa |
| Pull off Adhesion Strength | – | > 1.5 MPa |
If you need technical data that is not included here, please contact our technical team.